Shenzhen DMP Industrial Exhibition
Zhanhong Cutting Tool Co., Limited to Make an Appearance at Shenzhen DMP Industrial Exhibition As a highly influential event in the industrial sector in South China, the Shenzhen DMP Industrial Exhibition gathers a large number of high-quality industrial enterprises and professional purchasers from around the world. It serves as an important platform for showcasing […]
Our Company Achieved a Successful Debut at the DME Exhibition, Showcasing Our Industry Innovation Strength The highly anticipated DME exhibition recently concluded successfully. Our company participated with a stellar display of core products and innovative solutions, garnering widespread attention and praise for our professional technical capabilities and high-quality service. During the exhibition, our booth was […]
China.Zhuzhou International Advanced Hard materials Industry Expo.
Focus on Zhuzhou Exhibition: ZANHO Tools Shines with Core Technologies to Explore New Industry Opportunities Together Recently, the China.Zhuzhou International Advanced Hard materials Industry Expo. lasting 3 days successfully concluded at Zhuzhou International Convention and Exhibition Center. As a dedicated player in the field of [industry sector, e.g., “intelligent manufacturing” / “new energy equipment”], Zhanhong Cutting […]
Why has the tungsten products price skyrocketed?
The sharp increase in the tungsten price is the result of the combined effect of multiple factors, as follows: Supply Side Tightening of Mining Quotas: In 2025, the Ministry of Natural Resources set the total tungsten ore mining control target at 58,000 tons, a year – on – year decrease of 4,000 tons, representing […]
Economical CVD two-color coated carbide inserts
A full range of economical two-color coated carbide inserts. All carbide inserts are produced using raw carbide powder and OSTERWALDER presses. Guaranteed quality and economy. Available models are as follows: 43 Chip-breaker Code Feed(mm/r) Ap(mm) CNMG120404-43 0.12-0.52 0.7-4.8 CNMG120408-43 0.12-0.52 0.7-4.8 WNMG080404-43 0.12-0.52 0.7-5.0 WNMG080408-43 0.12-0.52 0.7-5.0 WNMG080412-43 0.12-0.52 0.7-5.0 DNMG150408-43 0.12-0.52 0.7-4.8 DNMG150608-43 0.12-0.52 […]
How to avoid tool wear in turning?
1.Flank wear Flank wear is the most ideal wear state because it is quite predictable and reliable. At the same time, a clear relationship is established between flank wear and the achievable tool life. However, if flank wear occurs too quickly – similar to typical flank wear but in a very short time – it […]
How to choose cutting tools correctly
Four Steps to Select the Optimal Cutting Tool: “Cut – off” machining is a common processing method in small – scale lathe machining. In this article, we will introduce the key points of tool selection by dividing them into four steps. Understand each characteristic and choose a cutting tool suitable for the machining scenario. 1.Tool […]
Why do cutting tools need to be “passivated”?
Tool “passivation” is a process of micro – treating the cutting edge of a tool. The purpose is to improve the performance of the tool by removing tiny burrs and irregularities on the cutting edge, or by moderately rounding the sharp cutting edge. This treatment doesn’t actually make the tool blunt; instead, it makes the […]
How to machine 38 common stainless steels?
Stainless steel is everywhere in life. Due to its excellent performance, it is undoubtedly one of the most important materials in industrial production. For cutting practitioners, understanding relevant cutting methods can significantly increase efficiency, improve quality, and reduce costs. Therefore, this article sorts out 38 common stainless steel grades and cutting methods. Readers are welcome […]
Metalloobrabotka 2024 Moscow
ZANHO cutting tools. Metalloobrabotka 2024 Moscow The Moscow Machine Tool Exhibition from May 20th to 24th came to an end. At this exhibition, ZANHO, we attracted many fans. In line with the purpose of not just selling products, we absorbed more dealers to join our team. This time, we also attracted many peers to try […]
What preparations do you need to make before determining tool life?
When working in a high-production environment, tool life is often a top priority. To some extent, it doesn’t matter that you have the best or most expensive tool; it’s more important to maintain a consistent lifespan so as not to break parts, but the question is how to achieve this? How to know tool wear […]
Why TC Titanium Alloy is a difficult-to-machine materials?
Why do we think titanium alloy is a difficult material to machine? Because there is a lack of deep understanding of its processing mechanism and phenomena. 1.”Heat” is the “culprit” that makes titanium alloys difficult to process The cutting force when processing titanium alloys is only slightly higher than that of steel of the same […]
